Rockwell 51 Spring Steel Finned Shafts

Home > Spearguns > Shafts >

Alternative Views:

Our Price: $79.95

Sale Price: $69.95

Savings: $10.00

Availability: Usually Ships in 24 to 48 Hours
Product Code: R51S

Rockwell 51 Shafts:

Qty:

Description

These American cut Coated Spring Steel Shafts are the shaft of the future. Harder, Stronger, Stiffer, Straighter, all equates to a spear that will outlast your typical softer stainless steel at a lesser cost.

Spring Steel Rockwell 51 Shark Fin Tabs

*Spears are induction hardened and drawn from ultra high tensile spring steel hardened to over 2000MPa or 51 Rockwell. If you compare a 45 Rockwell spear tip to a 50 Rockwell spear it is not just 10% harder but potentially 20% harder and tougher.

*Barbs are marine grade stainless steel and are designed to lock open after penetrating through a fish. You don't have to tune the barb it is already perfect.

*The coating is called an "Armadillo coating." This coating has so far been in a salt spray testing trough at 35 degrees C for 3 months and still the spears have not started to rust. This is equivalent to 12 months continuous use by a spearo.

*Spears are mechanically straightened to a maximum tolerance of 5 thousands of an inch/3 feet.

Maintenance for shaft: A. Remove Shaft from trigger.
B. Wash shaft with fresh water and lay in sun to dry quickly.
C. Make sure that the trigger and all spear contact spots on the gun are dry before reinserting the spear
D. Spray with Light Lubricant before storing for any length of time.

Share your knowledge of this product. Be the first to write a review »